Factory wholesale Welding Set - TIG Welding Machine 400TX4 – Jiesheng

Short Description:

Product Detail

Product Tags

Feedback (2)

Assume full obligation to meet all demands of our customers; accomplish ongoing advancements by promoting the advancement of our customers; become the final permanent cooperative partner of clientele and maximize the interests of shoppers for Assembly Robot Arm , Automated Welding Processes , Yaskawa Robot Distributor , Winning customers' trust is definitely the gold key to our good results! If you are fascinated in our products, make sure you sense absolutely free to go to our web site or make contact with us.

Factory wholesale Welding Set - TIG Welding Machine 400TX4 – Jiesheng Detail:

Modelnumber			YC-400TX4HGH	YC-400TX4HJE
Rated input voltage		V	380	415
Number of phases		-	3
Rated input voltage		V	380±10%	415±10%
Rated frequency		Hz	50/60
Rated input	T I G	kVA	13.5	14.5
	Stick		17.85	21.4
Rated Output	T I G	kw	12.8	12.4
	Stick		17
Power Factor			0.95
Rated No-Load Voltage		V	73
Output currentadjustable range	T I G	A	4-400
	Stick	A	4-400
Output voltage adjustable range	T I G	V	10.2-26
	Stick	V	20.2-36
Initial current		A	4-400
Pulse current		A	4-400
Crater current		A	4-400
Rated Duty Cycle		%	60
Control method			IGBT Inverter type
Cooling method			Forced air-cooling
High-frequency generator			Spark-oscillation type
Pre-flow time		s	0-30
Post-flow time		s	0-30
Up-slope time		s	0-20
Down-slope time		s	0-20
Arc spot time		s	0.1-30
Pulse frequency		Hz	0.1-500
Pulse width		%	5-95
Crater control process			Three mode(ON,OFF,REPEAT)
Dimensions (W×D×H)		mm	340×558×603
Mass		kg	44
Insulation class		-	130℃ (reactor 180℃)
EMC classification		-	A
IP code		-	IP23

Stands for standard configurations

TIG Welding Machine 400TX4
1111

YT-158TP

(Applicable plate thickness: Max. 3.0mm)

2222

YT-308TPW

(Applicable plate thickness: Max. 6.0mm)

3333

YT-208T

(Applicable plate thickness: Max. 4.5mm)

4444

YT-30TSW

(Applicable plate thickness: Max. 6.0mm)

eqwew

1. Multi-Functional Digital Display Meters

The values of current, voltage, time, Frequency, duty cycle, error code can be displayed.The minimum regulating unit is 0.1A

2. TIG Welding Mode

1). To switch the TIG welding mode by 4, to adjust the timing sequence by 5 .

2). The gas pre-flow& post-flow time, current values, pulse frequency, duty cycle & slop time can be adjusted when Crater On is selected.

3). The pulse frequency adjustment range is 0.1-500Hz.

3. Three Welding modes

1). DC TIG, DC PULSE & STICK.

2). When STICK welding is selected, both acid & alkaline electrodes are applicable and the arc- start & arc-force current can be adjusted.

4. TIG welding mode switch

1). the welding can be stopped by double press the torch switch when [REPEAT] is selected.

2). besides spot welding time, the slop can be adjusted too when[SPOT] is selected.

5. TIG welding mode switch

Digital encoder, rotate to adjust, press to confirm

1). In order to consider the reliability of using in the tough environment, the machine’s inside structure is horizontal.

2). The PC Board’s circuit control loop has a separate sealing chamber. the PC Board is vertically installed in order to avoid the dust heap up.

3). Large axial flow fan, independent air duct, good heat dissipation

4). Multi-protectiond: primary overvoltage, undervoltage, open-phase protection; secondary overcurrent, electrode short circuit, water- shjortage protection, temperature switch protection, etc.

6.Function Settings

1. 100 groups parameters can be stored & recalled.

2. [F.Adj] can set/adjust more functions

Current limitation function: the range is 50-400A

Anti-shock function: this function can be selected when stick welding in the wet or cramped environment conditions. The factory default is OFF.

Arc-start adjustment function: the arc-start current and time can be adjustable.

Short circuit alarming: it will alarm when the tungsten electrode and the workpiece are short circuit , it will prevent the damange of the tungsten electrode. burning(please refer to the operation manual for more settings)

7.Arc-start setting

High frequency arc-start and pull arc-start , are used even in the areas where the high frequency is forbidden.

Product detail pictures:

Related Product Guide:

We'll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of intercontinental top-grade and high-tech enterprises for Factory wholesale Welding Set - TIG Welding Machine 400TX4 – Jiesheng, The product will supply to all over the world, such as: Sudan, France, Jordan, Abiding by our motto of "Hold well the quality and services, Customers Satisfaction", So we provide our clients with high quality products and excellent service. Please feel free to contact us for further information.

6 Axis Robot Arm